Step 17: Reposition the spark module and hold it in place with the screws. Step 16: Screw the control board back to the control panel. Step 15: Position the new control panel on the oven and secure it using the four screws. Step 14: Lift the control panel off the oven and get a new one. Step 13: There are two screws on each side of the control panel securing it to the oven. Step 12: Move the control board and black plate out of the way. Step 11: Take out the screws around the control board and black plastic plate. Step 10: There will be a green grounding wire next to the spark module. Step 9: Take out the screws which hold the spark module on the right side of the control panel at the back. Step 7: Underneath the front of the control panel, there will be a heat deflector held by two screws. Disconnect the ribbon cable from the control board. Step 6: On the control board, you will see a green ribbon cable. Step 5: Set the back panel and brackets aside. Step 4: If there are any metal brackets underneath the upper back panel, take out the screws which secure.
Step 3: Remove the screws which hold the upper back panel using a Philips head screwdriver. Step 2: If your oven is close to a wall, pull it away in order to access the back. Step 1: First, disconnect the power to the oven by unplugging it or switching off the circuit breaker.
Samsung electric range manual how to#
How To Replace Samsung Oven Control Panelīelow, we have listed the steps you need to follow to replace your Samsung oven’s control panel… If you would like a visual of how to replace the touchpad of a Samsung oven, watch the video below. Step 28: Switch on the oven’s circuit breaker. Step 26: Position the upper back panel and hold it in place with the screws. Step 25: Reconnect the ribbon cable to the control board. Step 24: Screw the control board back to the control panel. Step 23: Position the heat deflector underneath the panel and hold it in place with the two screws. Step 22: Also screw back the grounding wire next to the spark module. Step 21: Screw the spark module back to the control panel. Step 20: Return the two screws on each side of the panel which secure it to the oven. Step 19: Return the control panel to the oven. Step 18: Screw the metal plate back to the control panel. Step 17: Stick the new touchpad on the metal plate making sure the sides align with the places you marked. Step 16: Get a new touchpad and peel off the backing. Step 15: Peel off the touchpad from the metal plate. Step 14: Lift off the metal plate and mark the sides of the touchpad using a pen, marker, or pencil. Step 13: Remove the three screws which secure the metal plate with the touchpad to the control panel. Step 12: Take out the two screws on the right and the other two screws on the left side of the control panel which secure the control panel assembly. Step 11: Also unscrew the grounding wire next to it.
Step 10: Take out the screws holding the spark module on the right side of the control panel. Step 9: Move the control board out of the way. Step 8: Take out the screws around the control board which secure it to the control panel. Step 7: Remove the deflector under the panel and set it aside. Step 6: Go to the front of the oven and take out the screws underneath the control panel. Step 5: Disconnect the ribbon cable from the control board. Step 4: Remove the panel and set it aside. Step 3: Using a Philips head screwdriver, take out the screws which secure the upper rear panel of the oven. Step 2: Pull the oven away from the wall. Step 1: Switch off your oven’s circuit breaker. Below are the steps you need to follow in order to replace the touchpad of your Samsung oven… If the buttons on your Samsung oven control panel are not working, the touchpad should be replaced. Samsung Oven Control Panel Not Working - How To Fix
0 kommentar(er)
